Microgrit PXA

Microgrit PXA Abrasives are designed for the use in the manufacture of polish and buffing compositions, tumbling creams and lapping coumpunds: both wet and dry tumbling operations and for finish work on metallographic and crystallographic specimens. They are prepared in ceramic lined equipment to eliminate metal contamination and are uniformly white in color. Particle size and absorptive properties are controlled within very close limits.

MICROGRIT PXA varies by particle size and absorption rates.

 Specifications

MICROGRIT
MATERIAL 		COMPARES
WITH 		ADSORB.
FIGURE
SIZE - MICRONS
RANGE AVERAGE
COMMENTS
PXA #101 E-111-H 23.0
1 - 8 2.5
BETTER COLORING THAN PXA #101H, BUT WITH SLIGHTLY MORE CUT.
PXA #101H R-33 23.5
1 - 6 2.0
GENERAL PURPOSE COLORING POWDER.
PXA #102 A#1 COARSE 22.0
1 - 10 3.0
GENERAL PURPOSE CHROME ROUGE.
PXA #103 A#1 COARSE 21.5
1 - 8 2.5
GENERAL PURPOSE CHROME ROUGE.
PXA #104 A#1 COARSE
E-111-M 		17.0
1 - 10 4.5
SIMILAR TO PXA #203, BUT WITH STILL BETTER CUT.
PXA #201 E-67 19.5
2 - 10 5.0
STAINLESS CUT AND COLOR.
PXA #203 A#2 COARSE
E-111-M 		20.5
1 - 10 4.0
SIMILAR TO PXA #102, BUT WITH MORE CUT.
PXA #301 A#1 SPECIAL 24.5
0.5 - 6 1.5
EXCELLENT FOR CHROME COLOR, NON-FERROUS AND PLASTICS.
PXA #401 A#1 FINE 25.5
0.5 - 4 1.0
FINE FOR CHROME COLOR, NON-FERROUS, PLASTICS AND CLEAR LUCITE.
PXA #411 A#1 FINE 26.0
0.5 - 2 0.75
FINE FOR CHROME COLOR, NON-FERROUS, PLASTICS AND MARBLE POLISHING.
A #G10 #10 GLAZING
POWDER 		18.0
0.5 - 22 7.5
NOTE: STANDARD PACKING FOR A #G10 IS LARGE DRUMS OF 125KG NET WEIGHT EACH.